# PETALS: PETALS Services Platform
# Copyright (C) 2005  EBM WebSourcing
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1300
# USA.
#
# Initial developer(s): EBM WebSourcing

# -----------------------------------------------------------------------
# PEtALS properties
# -----------------------------------------------------------------------

#This property specifies the name of the container. In distributed mode, this property is mandatory
# and must match a container name in the topology.xml file
petals.container.name=0

#This property set the maximum duration of the processing of a life-cycle operation on a JBI
# components and SAs (start, stop, ...). It prevents from hanging threads. 
petals.task.timeout=120000

#This property specifies the URL path to the PEtALS repository. PEtALS holds its JBI configuration 
# in this repository and can recover this configuration from it.
#If not specified, the default repository is in $PETALS_HOME/repository.
#petals.repository.path=file:///home/test/repository

#This property is used to activate the control of exchange acceptance by target component when
# the NMR routes messages (see isExchangeWithConsumerOkay and isExchangeWithProviderOkay methods
# in JBI Component interface)
# If not specified, the false value is selected by default.
#petals.exchange.validation=true

# This property is used to isolate the ClassLoaders created for Shared Libraries and Components 
# from the PEtALS container one.
# It can be useful to avoid concurrent libraries loading issues.
# If not specified, the false value is selected by default
petals.classloaders.isolated=true

# This property is used to unactivate the autoloader service.
#It can be useful in production environment to unactivate this service.
petals.autoloader=true

# Alternate topology configuration file URL. This value must be a valid URL like :
#  - http://localhost:8080/petals/topology.xml
#  - file:///home/petals/config/topology.xml
#  - or any valid URL (java.net.URL validation)
# If not specified, the local topology.xml file is used
#petals.topology.url=

# This property defines the strategy of the router
# Two kind of strategy can be defines: 'highest' or 'random'.
# The following parameters, separated by commas, represent respectively the weighting for a local
# endpoint, the weighting for a remote active endpoint and the weighting for a remote inactive endpoint.
# The 'random' strategy chooses an endpoint randomly in function of the defined weightings.
# Every endpoint has a chance to be elected, but the more the weight is strong, the more the endpoint
# can be elected.
# The 'highest' strategy chooses an endpoint amongst the endpoints with the strongest weight.
# If not specified, the strategy 'highest,3,2,1' is selected by default
#petals.router.strategy=highest,3,2,1

# This property defines the number of attempt to send a message to an endpoint.
# Several attempts can be done when there is transport failure during the convey of a message
# If not specified, 2 attempts is selected by default 
#petals.router.send.attempt=2

# This property defines the delay between the send attempts, in milliseconds.
# If not specified, 1 second is selected by default 
#petals.router.send.delay=1000


#Set the following properties in order to establish SSL connections.

# This property defines the key password to retrieve the private key.
#petals.ssl.key.password=yourKeyPassword

# This property defines the keystore file where the keys are stored.
#petals.ssl.keystore.file=/yourPath/yourKeystoreFile

# This property defines the keystore password.
#petals.ssl.keystore.password=yourKeystorePassword

# This property defines the truststore file where the signatures are verified.
#petals.ssl.truststore.file=/yourPath/yourTruststoreFile

# This property defines the truststore password.
#petals.ssl.truststore.password=yourTruststorePassword


#Transporter configuration
#This property defines the number of message that can be received via TCP at the same time.
# If not specified, '10' receivers is selected by default
#petals.transport.tcp.receivers=10

#This property defines the number of message that can be send via TCP at the same time, per component.
#petals.transport.tcp.senders=10
# If not specified, '10' senders is selected by default

#This property defines the timeout to establish a connection, for a sender, in millisecond.
# If not specified, 5000 milliseconds is selected by default
#petals.transport.tcp.connection.timeout=5000

#This property defines the timeout to send a TCP packet, for a sender, in millisecond.
# If not specified, 5000 milliseconds is selected by default
#petals.transport.tcp.send.timeout=5000

#This property defines the delay before running the 'sender' eviction thread, in millisecond.
# If not specified, 1 minute is selected by default
#petals.transport.tcp.send.evictor.delay=60000

#This property defines the delay before an idle 'sender' is set evictable, in millisecond.
# If not specified, 1 minute is selected by default
#petals.transport.tcp.send.evictable.delay=60000

#This property defines the duration of temporary persisted data, such as Message Exchange, in millisecond.
# If not specified, 1 hour is selected by default
#petals.persistence.duration=3600000

#Topology update period (in s)
topology.update.period=101

# Registry configuration

#Registry transporter timeout (in ms)
registry.transport.timeout=5000

#Synchro period (in s)
registry.synchro.period=113

#To use mySQL
#registry.db.driver=com.mysql.jdbc.Driver
#registry.db.url=jdbc:mysql://localhost:3306/petalsRegistry
#registry.db.password=petals
#registry.db.user=petals
#registry.db.dialect=org.hibernate.dialect.MySQLInnoDBDialect
#registry.db.caching.enabled=true
#registry.db.c3p0.enabled=true

